We are fantastic at component level recovery, recovery from physically damaged devices and complex data recovery from monolithic flash. Although USB drives are a convenient alternative to traditional HDDs, they are easily damaged and, in severe cases, can experience severe physical damage to their PCB or chips. USB drives can also suffer from memory wear after excessive writing of data, over long periods of time. Obvious symptoms of a USB crash is when it’s not recognized by your computer or freezes it when attached. If you notice this, disconnect your USB immediately and do not attempt to access or try to repair it under any circumstances. This is because you might cause more damage and likely dramatically reduce the chance of successful recovery. Many flash manufacturers are switching to monolithic flash technology to reduce costs. Data recovery from monolithic flash devices is more complicated and requires certain tools and experience. This is why many data retrieval companies avoid these cases.

USB data recovery
USB recovery

Common causes of USB drive failure:

  • Snapped USB port
  • Detected as Unknown Device
  • Memory Wear
  • Overheated chip damage
  • PCB Physical damage
  • Accidental Format
  • Virus damage
  • Corrupted file structure
  • Natural disaster
  • Lost connection on PCB

If you are facing a USB crash and fear losing your precious information, you need a firm with a strong track record in data recovery from USB media. We provide risk-free diagnostic service and reassure you that your data can be successfully recovered.


Why is a Computer Network required?

There are a number of advantages to a computer network. Some basic benefits can be listed below:

  • Helps in connecting multiple computers together for data exchange at a high speed
  • All resources, like printers and scanners, can be shared on the network, enabling access to all users
  • Allows sharing expensive software and database to all in the network
  • Networking communication is efficient and offers fast speed at a very low cost

Century IT Consultant understands that each organization has its own set of requirements for network connection setups. And so, our experts study and investigate your demands and provide you with the best solution for the internet and modem setup.

There are four different types of broadband connections. They are:

Digital Subscriber Line (DSL)
This is the most common method of connecting to the internet and is generally used in homes and small workplaces. A telephone connection is required to set up this type of a broadband connection. The standard phone service shares the same telephone line for broadband connection, without any obstruction between the two. The speed of a DSL connection varies with distance from the local telephone exchange. The speed will be faster if the connection is close to exchange and slower if it is far from the switching station.

We are experts at setting up a DSL network at different kinds of areas. You can rely on us to deliver same day networking and broadband installation services at an affordable cost.

Cable Broadband
A broadband cable connection is provided by a local cable TV operator. There is a coaxial cable that is connected to the broadband, usually with the same line as the TV service. These type of connections offer a high-speed broadband connection. However, one of the main drawbacks of this type of connection lies in the speed variations. At peak times, you will experience slower speed problems because of congestion with more users on the system.

Satellite Connection
This is the slowest broadband service. However, it is best suited for the people residing in remote areas where DSL and Cable broadband connections are tough to set. Although the installation cost of a satellite connection is high, the cost can be compensated with monthly charges, which are low in comparison to that of DSL and cable connections.

Century IT Consultant has set up various satellite connections all around Melbourne and Perth. Let us know your requirement and we will get the network setup in no time.

Fiber-optic broadband connection
This is the fastest internet connection available in the current time. However, the service areas of fiber optic network are limited because of the problems in laying down the cables. However, the operating cost of this type of connection is quite low with fast speed download, in comparison to other broadband connections.

We are experts at connections and have quite a lot of experience in offering many organizations fast internet setup.

Why choose Century IT for networking and broadband connection in Abbotsford?

Broadband services vary from place to place. While availing a broadband connection, it is always advisable to do some research before choosing the type of service required for your specific needs.

Satisfied customers of Century IT count us to be there trusted partners. With an experience of over two decades, our team has expertise in all types of national Broadband Network (NBN), Wi-Fi setups, DHCP, and DNS setups on all IP networks, as well as troubleshooting in Voice Over IP (VOIP), etc. Some of the major services we offer are listed below:

  • On-site installations of all types of network and broadband connections
  • Fault finding and repairing of existing connections
  • Range extenders in the existing network
  • Keeping our customers up to date with the latest technologies
  • Latency management

For more details and the services offered at Century IT Consultant, reach out to us today!