If you see a message that indicates that your hard drive is detected by your computer, you should be ready to deal with one of many problems that your hard drive may have encountered. You can get an error message that says “boot device missing” when you booting up your computer. You can also see a similar message when you attach an external hard drive to the computer and you are asked to either format or initialize the drive before using it. All of these error messages point towards just one thing – your hard drive isn’t capable of doing anything that it is supposed to.
This means that the data that you had on the hard drive could be lost due to the issue with the drive. And there is a whole lot of data that everyone stores on their hard drive. From family pictures and videos to business documents and more, it could be anything. In lots of cases, you won’t even see a proper warning sign that indicates that your hard drive is some time away from failure. So you don’t have too much act to not let it happen. Before you know it, all your data is gone.
Types of hard drive failure
Storage devices like hard drives can face several problems, which can make it hard for you to get access to the important personal and professional data stored inside them. So what should you do when you first find out that your hard drive is not detected?
The old electromagnetic hard drives that are still used by many people can undergo different types of failures. The first of these failures occur due to the presence of defective areas in the drive. If these areas are used continuously, they can cause the hard drive to slow down. You will start error messages. And eventually, you will have data missing without knowing the reason for it. When the system finds out about these areas in the drive, you will be asked to carry out a partition format. You should never do it because if you do, you will lose all your data forever.
If your computer can’t detect the hard drive, make sure that you check whether it is making any noises or not. Scratching, clicking, and whirring noises indicate physical failure in the drive. And this could be the possible reason why your hard drive is not being detected by the computer. Make sure that the connections are properly done. If necessary, you can get in touch with a company that offers services related to hard drive data recovery in Melbourne or any other location.
Cause of hard drive not recognized error
In some cases, a hard drive not recognized error has nothing to with the drive itself. The cables that connect the computer with the hard drive can go wrong, leading to this error. When we talk about the internal hard drives installed inside a computer, these cables are the SATA cable that connect the motherboard and the hard drive with each other. In case of external hard drives, it is usually the USB cable. It could also be the dongle that connects SATA cable and USB.
Several times, just replacing or tightening the SATA cable is enough to get the internal hard drive recognizable again. If this is the case, it is a false alarm raised due to a faulty connection and there is nothing wrong with the hard drive itself. Just fixing the connection is enough to save yourself from a possible data loss situation. This is one of the first steps that you will be asked to perform while troubleshooting. However, there are times when it is indeed the hard drive that’s gone bad.
The first reason for your hard drive going bad is it is corrupted. It is often the drive’s logical system that becomes corrupt. Corrupted partition table, boot sector, or any other area of the hard drive can cause its failure. It would appear to be blank if this is the case. So your computer may ask you to format or initialize the hard drive. Logical failure can result in hard drive not recognized and boot errors.
The other reason could that the drive is broken. Physical components of the drive are at fault many times. These components are both sensitive and complex. So the chances of them being exposed to defects are very high. However, it is not often that this happens. They can continue to perform for years. But due to continuous use or other reasons, the may encounter problems. This can cause the hard drive to break down. And the next time you open your computer, you will likely see the not recognized error message.
Possible solutions for a not detected hard drive
To begin with, you can start the software recovery process by connecting the drive to another computer. If this doesn’t work, you can use data recovery tools. There are several of these out there that can effectively deal with this issue and protect your data. Most of the tools available on the market don’t need professional help to install and use them. You can do it on your own by following the instruction.
However, if you are not sure about what’s wrong with the hard drive and whether or not data recovery tools will do the job, you should not waste any more time and contact a professional service that excels in hard drive recovery in Perth, Melbourne, or any other location. Professional assistance is needed if you haven’t already backed up data because if there is something wrong with the hard drive, you could lose your data and never get it back. These people can safely salvage all your data from the hard drive. They will first evaluate the situation and then offer you recommendations on the possible solutions.